Configured for textile exporters building buyer-ready disclosure reports.
Per facility, per report
Buyer Disclosure Report
€999/report
Scope 1, 2 & 3 · buyer-ready PDF
Operating mode
Build a buyer-ready report with less typing
Use Smart Intake, jump between steps, and keep the decision layer visible while you work. The form now behaves more like a textile carbon workspace than a static calculator.
You can change the style later from your dashboard and regenerate the PDF. It does not use up a regeneration.
Choose the period you can actually evidence.
Your bills, your production record and this period must all describe the same span of time. Carbon intensity is emissions ÷ production — if the bills cover two months and the production figure covers a year, the result is not an intensity and a verifier will reject it.
✓ Have twelve monthly bills? Use the full year. This is what EU buyers prefer.
✓ Only have one month? Set the period to that one month. A short, fully-evidenced period is stronger than a long, half-evidenced one.
✗ Don't set a year and upload three months of bills. We check, and the category will not reach evidence-matched.
Bills are only counted for the days they actually cover. A bill from outside this period contributes nothing, however genuine it is.
⚠ End date is in the future. Use a completed reporting period for accurate, auditable data.
tCO₂e
tCO₂e
tCO₂e
kg
Reporting Scope & Profile
Helps us frame your report boundary and match it to buyer expectations. Not sure? Leave the defaults. We use sensible assumptions and mark them clearly in the report.
Step 1 of 5
Scope 1 — Direct
0
kgCO₂e
Scope 2 — Electricity
0
kgCO₂e
Total Emissions
0
kgCO₂e
02
Scope 1 — Direct Fuel Combustion
Enter consumption from fuel invoices. Emissions auto-calculate.
Using IPCC / DEFRA default emission factors. Override factors if you have site-specific values.
Import monthly energy data in one step: diesel, natural gas, LPG, grid electricity and solar. CSV, XLSX and XLS supported.
Auto-detect common headersPreview before applyWarns on missing or suspicious values
liters
kgCO₂e/L
kgCO₂e
m³
kgCO₂e/m³
kgCO₂e
kg
kgCO₂e/kg
kgCO₂e
kg
kgCO₂e/kg
kgCO₂e
liters
kgCO₂e/L
kgCO₂e
kg
kgCO₂e/kg
kgCO₂e
Biomass is treated as biogenic. Under ISO 14064-1 and the GHG Protocol, CO₂ from sustainably sourced biomass is reported separately from the fossil total and is not added to your Scope 1 figure. Only the non-CO₂ residual (CH₄ and N₂O, the default factor above) counts toward Scope 1. If you burn rice husk, bagasse or wood, enter it here — leaving it out understates your energy profile and a verifier will ask about it.
kgCO₂e
03
Scope 2 — Purchased Electricity
Grid electricity and solar offset
kWh
kWh
kgCO₂e/kWh
USD/kWh
kgCO₂e
kgCO₂e
kgCO₂e
Step 2 of 5
04
Scope 3 — Value Chain Emissions
Upstream materials, transport, waste & downstream
Enter activity quantities — emissions auto-calculate using published DEFRA / IPCC emission factors. Only fill categories that apply to your facility.
Import Scope 3 activity data in one step: raw materials, transport, waste, packaging and business travel. CSV, XLSX and XLS supported.
Maps textile-friendly labelsFlags zero or negative rowsShows what was skipped
kgCO₂e
kgCO₂e
kgCO₂e/kg
High intensity detected. Values above 20 kgCO₂e/unit may indicate a data entry error (e.g. wrong unit, fuel in litres vs kg). Industry average is 2–10 kgCO₂e/kg for textiles. Please verify your inputs.
05
Water, Chemicals & Waste
Environmental indicators required by EU buyers
Where to find your water figure.
Use the metered volume in m³ for the same period as your energy bills, from your water bill, your own meter readings, or your tanker delivery log (tankers: number of loads × capacity in m³).
Billed a flat rate, with no volume on the bill? Leave this blank and tick the box below. The report will state “Not tracked” for water rather than show an estimate. Buyers accept a stated gap; they do not accept a number that turns out to be guessed.
m³
Same period as your energy bills. Leave blank if you have no metered figure.
kg
kg
Step 3 of 5
Evidence & Documents
Upload bills and invoices — linked in your PDF report
Smart Bill Upload — Auto-fill from Documents
Upload your electricity, fuel & gas bills and our system reads the data automatically, no manual entry needed.
OCR AI
Accepted: PDF, JPG, PNG (max 10MB each). Missing documents show as "Pending" in the report.
Two things that decide whether your evidence verifies.
1. The photo must be sharp. We read the consumption figure directly off the document. A blurred or dark photo cannot be read and the category will stay unverified. Lay the bill flat, use good light, hold the camera parallel and fill the frame. A PDF downloaded from your utility's portal is always better than a photo — use one if you have it. We check sharpness as you upload and will warn you.
Uploaded your bills already? Let the system read the figures off them instead of typing them in.
Every figure it fills in is marked “read from your document — check this”. Check each against the bill and correct anything wrong.
A figure we read for you is not independently verified, because it came from the same document we would otherwise check it against —
the report says so, and says it differently for any figure you enter or correct yourself.
Haven’t got your bills to hand? Try it with three real Pakistani utility bills — genuine scans, personal details erased.
One of the three is a water bill that states charges but no volume. The system refuses to give a figure for it, and says why.
That refusal is deliberate — a number we cannot support is worth less than no number at all.
2. More than one meter? Upload every bill, and enter the combined total. Many sites have separate connections per floor, block or shift. Upload all of them into the same box — we add them together — and make sure the figure you typed above is the sum for the period, not one connection. Uploading two bills but entering one meter's reading is the most common reason a category fails to match.
Encrypted upload (HTTPS)
Strictly confidential
Never sold or shared
One-time evidence checklist. This is everything an accredited ISO 14064-3 verifier will ask for — upload it all now and you won't be asked again. Rows 1–5 support your Scope 1/2 numbers; rows 6–10 complete the verification pack (Scope 3, certificates, legal identity).
Click to upload electricity bills
PDF, JPG, PNG · 10MB max
Click to upload fuel invoices
PDF, JPG, PNG · 10MB max
Click to upload natural gas bills
PDF, JPG, PNG · 10MB max
Click to upload production records
PDF, XLSX, CSV · 10MB max
Click to upload water records
PDF, JPG, PNG · 10MB max
Click to upload solar / REC documents
PDF, JPG, PNG, XLSX · 10MB max
Click to upload supplier invoices
PDF, JPG, PNG, XLSX · 10MB max
Click to upload freight documents
PDF, JPG, PNG, XLSX · 10MB max
Click to upload certificates
Turns "self-declared" into "certificate on file"
Click to upload registration documents
PDF, JPG, PNG · 10MB max
Additional Data Points (optional)
Label
Value
Step 4 of 5
Review Your Report
Confirm all details before generating
Encrypted upload (HTTPS)
Strictly confidential
Never sold or shared
Scope 1
—
kgCO₂e
Scope 2
—
kgCO₂e
Scope 3
—
kgCO₂e
Grand Total
—
kgCO₂e
Phase 4 · Carbon Intelligence Engine
Live Regulatory & Risk Signals
Auto-computed from your inputs above. Updates in real time as you edit emissions, evidence, and production data.
CBAM-style cost sensitivity (hypothetical)
Enter emissions to calculate
Forward-looking proxy at €70/tCO₂e — textiles are not in CBAM Phase 1
Benchmark vs. Industry
—
vs. textile avg 3.4 kgCO₂e/unit (GHG Protocol)
Est. Reduction Opportunity
—
Modeled from Phase 3 — fuel, energy & supplier levers
Decision Snapshot
Risk Status
—
—
Buyer Readiness
—
—
Dominant Scope
—
Largest emission source in this report
Next Best Move
—
—
90
90-Day Decarbonization Roadmap
A tighter operating plan for your first quarter after report generation.
Report Options
Choose which sections to include in your PDF
Confirmation & Consent
Required before generating your report
Validating your submission…
PDF downloads automatically after generation
Report Generated!
Your carbon report has been created and saved. Download it below.
Report IDCRP-2025-00001
What would you like to download?
✓
Match Your Evidence
Get an Evidence-Matched (Level 3) status on your PDF. Our system cross-checks that your uploaded evidence matches your reported figures, so buyers can see your data is first-party validated. This is an automated, system-performed check, not independent third-party (ISO 14064-3) assurance.
CBAM Exposure Summary
EU Carbon Border Cost
€ —
Emission Intensity
— kgCO₂e/kg
Live Estimate
CBAM Exposure
EU Carbon Border Cost
€ —
at €65/tonne ETS price
Emission Intensity
— kgCO₂e/kg
SBTi 1.5°C target: 1.5 kg
Potential Saving
€ —
vs. SBTi 1.5 kgCO₂e/kg target
Industry Position
Low riskHigh risk
Updates live as you fill in energy & production data on Steps 2–3.
Import preview
Review detected mappings, warnings and example rows before filling the form.
